1 / 1
Telescope Finder Scope Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount has more adjustment than the average mount. My original mount was warped and couldn't be aligned.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 129
- Makes
- 1
- Views
- 829
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
This finder scope mount has more adjustment than the original, while still using the standard thumb screws. Pretty solid mount, so don't worry about it wiggling about. its for a 2 hole mount on the Telescope. No drilling required the bolts will just thread in, I used m3 screws for the front. you could use just 1 on the front instead of all 3.
standard print settings. I used 0.6mm nozzle and 0.3 layers and it was good.
Don't forget to post your makes, and give me feedback if it needs any improvements.