Kingroon KP3s - Orbiter 2.0 - Dragon UHF
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix to use the design with orbiter 2.0 and dragon uhf on Kingroon KP3s. It is great.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 1087
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed it in ASA, because I intent to enclose the printer.
From cnckitchen I used the M3x3mm inserts and adapted the holes to it.
I made 4 holes for the part cooling fans on each side, so the fans can be adjusted for normal mode and uhf mode.
Inserts are needed for the fanshroud and for the centerpiece (Red circeles on the images).
On the back of the center is a place for a screw to adjust the distance for the limit switch.
Fan ducts for part cooling fan can be found in the orginal model, but i think it would be good to mirror them… The recommended 12v gdstime work fantastic with 24v.
All parts can be printed without support or just painted on support.
Printing direction of the center is in the images.