Kingroon KP3s - Orbiter 2.0 - Dragon UHF
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix to use the design with orbiter 2.0 and dragon uhf on Kingroon KP3s. It is great.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 43
- Makes
- 0
- Views
- 1,089
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I printed it in ASA, because I intent to enclose the printer.
From cnckitchen I used the M3x3mm inserts and adapted the holes to it.
I made 4 holes for the part cooling fans on each side, so the fans can be adjusted for normal mode and uhf mode.
Inserts are needed for the fanshroud and for the centerpiece (Red circeles on the images).
On the back of the center is a place for a screw to adjust the distance for the limit switch.
Fan ducts for part cooling fan can be found in the orginal model, but i think it would be good to mirror them… The recommended 12v gdstime work fantastic with 24v.
All parts can be printed without support or just painted on support.
Printing direction of the center is in the images.