Mounting Plate for Steel Pipe Railing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets to fix a rectangular pole on a steel pipe railing.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I designed these brackets to fixate the bird feeder having a 70x70mm wooden pole at my railing in winter time.
Basically you can use just 2 screws for each bracket if you want to remove the pole more often. But additional 2 screws can be used to secure against unintended lifting.
There is brackets for a 42.0mm and a 26.5mm steel pipe.
The 26.5mm additionally is available also with 2mm offset in case you have a protecting foot (like https://www.printables.com/model/360565-protection-foot-for-wood-pole).
The nuts have been design with my nut clearing template (https://www.printables.com/model/364572-nut-clearing-templates), which means:
- nut cavity can be printed without any support
- for easy assembly nuts can be pressed in and will not fall out again
For each holder you need:
- 4x screw M5x16
- 4x nut M5
For the pole you need:
- 4x screw 4 x 40 mm
Printing:
Filament: ASA or PETG
Infill: for maximum robustness I used 100%
Support: not needed