1 / 3
Extruder Motor Cooler MK3s/+ by Simonpk Remix 4x10 Version — zdjęcie 1
1 / 3

Extruder Motor Cooler MK3s/+ by Simonpk Remix 4x10 Version

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A remix model of Simonpk's Extruder motor cooler, with additional filament cleaner, and cleaner cable setup

Ocena
0 / 5
Polubienia
7
Pobrania
38
Wydruki
0
Wyświetlenia
666
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The sole purpose on why I remixed the model is due to the wires being out in the open, and just wanted a cleaner setup, I also added a filament cleaner to make sure that no dirt gets into the extruder risking clogs and debris. The wires are hidden the same way where all the heatsink fan, blower fan goes.  This is for the 4x10 noctua fans only!

Files included:

  • Engraved version
  • Embossed version
  • Printable name for the Engraved version

 

How to print: 

Print it pointing upwards, with supports

0.2 or 0.3 layer height

5% infill gyroid

support on build-plate

 

Update: 

-Added the 4x20 version w/o the nozzle cleaner, this was requested by Jakub

Note:

- The 2 added holes at the opening of the model (Fan Mount) are not thoroughly holed out, you'll need a small drill or a screw to drill out what's left of it. The model has way too many faces to be deleted and it alters the whole model doing so. 

 

 

Tagi