Ender 3 - Electronic Case - not finished
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fully enclosed Electronic case was originally designed for my upgrade to Klipper.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This fully enclosed Electronic case was originally designed for my upgrade to Klipper.
The Case was designed to fit:
- 1x - Raspberry Pi 3 or 4
- 2x - Mosfet (example: Amazon)
- 1x - Solid State Relay (example: Amazon)
- 1x - Self designed PCB as a Fan HUB (Gerber files)
- 1x - 0.96" OLED Display (example: Amazon) for Display Case Temperature and IP Address. Code Can be fount here.
- 4x - 40x40x10mm Fans
The PCB holders as well as the Lid mounting holes are designed so they can fit a M3 melting nut for a good fit. The Case is Designed so it will fit on a small Printbed and can be Glued together if needed.
Attention: There is still work in progress! Not all Case parts are aviable yet.
Print Settings i used where:
Filament: ASA
Layerheight 0.2mm
Walls: 1.2mm
Infill: 20%
On some Points you will need Supports.