1 / 1
Ender 3 - Electronic Case - not finished
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This fully enclosed Electronic case was originally designed for my upgrade to Klipper.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 530
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This fully enclosed Electronic case was originally designed for my upgrade to Klipper.
The Case was designed to fit:
- 1x - Raspberry Pi 3 or 4
- 2x - Mosfet (example: Amazon)
- 1x - Solid State Relay (example: Amazon)
- 1x - Self designed PCB as a Fan HUB (Gerber files)
- 1x - 0.96" OLED Display (example: Amazon) for Display Case Temperature and IP Address. Code Can be fount here.
- 4x - 40x40x10mm Fans
The PCB holders as well as the Lid mounting holes are designed so they can fit a M3 melting nut for a good fit. The Case is Designed so it will fit on a small Printbed and can be Glued together if needed.
Attention: There is still work in progress! Not all Case parts are aviable yet.
Print Settings i used where:
Filament: ASA
Layerheight 0.2mm
Walls: 1.2mm
Infill: 20%
On some Points you will need Supports.