IKEA Samla 5l Partitions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two variants of partitions for IKEA Samla 5l box.
- Ocena
- 4,6 / 5
- Polubienia
- 121
- Pobrania
- 393
- Wydruki
- 6
- Wyświetlenia
- 3881
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to separate the fasteners in the 5l IKEA Samla box. I managed to get a 3D model of it, so modelling the partition was a matter of a few minutes. I modelled the partitions in two versions.
If the partition is too tight in your box, let me know in the comments and I will adjust the model.
Variants:
Variant 01 - 121 mm high
Variant 02 - 105 mm high
If you want to modify my design, I am attaching the STEP files and also below the link to the model in OnShape.
Important notice:
Unfortunately, I was unable to print the longitudinal partition as it is larger than the print bed on my printer (Original Prusa MK3S+).
Note:
Please don't forget to leave a rating or a comment. Feedback is important for me Thank you very much.
Happy printing!