Modular stand Korg Volca & Korg NTS-1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand with modular elements to better organize your Korg Volca synths.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 329
- Wydruki
- 2
- Wyświetlenia
- 2769
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
ENGLISH:
Stand with modular elements to better organize your Korg Volca synths.
There is an additional module for the Volca Modular cables that fits into the base that supports the synth.
If you also own a Korg NTS-1 you can add it to the stand by replacing the two lower steel corners with the two 3D printed components.
No additional screws are required to assemble the stand. Only glue is needed to assemble the "VolcaStand_Side" and "VolcaStand_WireEntry" parts.
ITALIANO:
Stand con elementi modulari per organizzare al meglio i tuoi synth Korg Volca.
E' previsto un modulo aggiuntivo per i cavi del Volca Modular che si incastra alla base che sorregge il synth.
Se possiedi anche un Korg NTS-1 puoi aggiungerlo allo stand sostituendo i due angolari inferiori in acciaio con i due componenti stampati in 3D.
Per assemblare lo stand non sono necessarie viti supplementari. Occorre solo della colla per assemblare le parti "VolcaStand_Side" e "VolcaStand_WireEntry".