Glassless masks for Krokus 67
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are simple enlarger masks for Krokus 67 enlarger - 24x65 and 33x65 - I made them to make prints of photos taken…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 348
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
These are simple enlarger masks for Krokus 67 enlarger - 24x65 and 33x65 - I made them to make prints of photos taken with Sprocket Rocket and my modified Mamiya RZ67 220 back ( see https://www.thingiverse.com/thing:4547825 ). XPan frames should also work fine ;)
NOTE: you shouldn't slide film, when it's squished inside this contraption - you're risking scratches...
I've printed this so the sides having contact with film were on the bottom - makes nice surface with default Ender 3 Pro magnetic bed - I suppose those powder coated PEI from Prusa are even better. For the filament, I just had Fiberlogy Impact PLA - possibly Polipropylen and nylon would be better choices, as they are "softer" and provide less friction on film.
Aside from printed parts, you'll need:
- 4 pins/tubes 4mm diameter and 5mm length (I used brass tube)
- some 2-3mm thick foam, preferably self-adhesive
Category: DIY