Glassless masks for Krokus 67
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are simple enlarger masks for Krokus 67 enlarger - 24x65 and 33x65 - I made them to make prints of photos taken…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
These are simple enlarger masks for Krokus 67 enlarger - 24x65 and 33x65 - I made them to make prints of photos taken with Sprocket Rocket and my modified Mamiya RZ67 220 back ( see https://www.thingiverse.com/thing:4547825 ). XPan frames should also work fine ;)
NOTE: you shouldn't slide film, when it's squished inside this contraption - you're risking scratches...
I've printed this so the sides having contact with film were on the bottom - makes nice surface with default Ender 3 Pro magnetic bed - I suppose those powder coated PEI from Prusa are even better. For the filament, I just had Fiberlogy Impact PLA - possibly Polipropylen and nylon would be better choices, as they are "softer" and provide less friction on film.
Aside from printed parts, you'll need:
- 4 pins/tubes 4mm diameter and 5mm length (I used brass tube)
- some 2-3mm thick foam, preferably self-adhesive
Category: DIY