Wallplate Bracket for Lutron Caseta Pico Remote
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the Lutron Caseta Pico wallplate bracket. I was installing a bunch of remotes and, of…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 159
- Wydruki
- 0
- Wyświetlenia
- 902
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a replacement for the Lutron Caseta Pico wallplate bracket. I was installing a bunch of remotes and, of course, came up one bracket short... so here's a replacement that has the same basic dimensions as the Lutron bracket. Unlike other models here, this one uses the mounting slot on the back of the remote, so it's easy to attach and remove.
The model prints great in PLA. It has enough flexibility to attach the remote, but doesn't flex on the wall when installed.
Edit 2018.09.21: I revised my model for better printability. This one can print well without supports. (If you downloaded the one that had supports, throw it away and download this one instead!)
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 6
Rafts:
No
Supports:
No
Resolution:
0.35mm first layer, 0.25mm above
Infill:
30%
Filament: Any PLA Any
Category: Replacement Parts