For 0.6mm nozzle / TPU (205C ~ 235C)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for 0.60mm nozzle size. Temperature calibration towers for L-heights 0.16, 0.20, 0.25, 0.30 & 0.40mm.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 848
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
For every temperature calibration tower (based on layer height), there will be an accompanying ReadMe text file (Layer Heights 0.16, 0.20, 0.25, 0.30 & 0.40mm).
These straight forward temperature calibration towers are designed to work accurately with CURA 5.2.1 extensions, post processing script, that loops a range of incremental temperature for the selected temperature calibration tower.
Though I am using a DELTA to do some test prints, these towers should work with other printer brands and models.
- Load up CURA. In my case it is version 5.2.1
- Import the desired layer height temperature STL (or 3MF) tower.
- Position it accordingly on your 3D PRINTER bed.
- Click Extensions> Post Processing> Modify G-Code>Add Script> TempFan Tower.
Refer to the ReadMe file for input parameters for the particular layer height you want to test. Don't worry. Everything you need is in the ReadMe file. - Proceed to slice and print the tower
- Please remember to DELETE the post-script when done testing. If you forget to delete the post script, it will induce your printer to keep changing temperature as it prints the next model!