1 / 6
For 0.6mm nozzle / TPU (205C ~ 235C)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for 0.60mm nozzle size. Temperature calibration towers for L-heights 0.16, 0.20, 0.25, 0.30 & 0.40mm.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 77
- Makes
- 0
- Views
- 848
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
For every temperature calibration tower (based on layer height), there will be an accompanying ReadMe text file (Layer Heights 0.16, 0.20, 0.25, 0.30 & 0.40mm).
These straight forward temperature calibration towers are designed to work accurately with CURA 5.2.1 extensions, post processing script, that loops a range of incremental temperature for the selected temperature calibration tower.
Though I am using a DELTA to do some test prints, these towers should work with other printer brands and models.
- Load up CURA. In my case it is version 5.2.1
- Import the desired layer height temperature STL (or 3MF) tower.
- Position it accordingly on your 3D PRINTER bed.
- Click Extensions> Post Processing> Modify G-Code>Add Script> TempFan Tower.
Refer to the ReadMe file for input parameters for the particular layer height you want to test. Don't worry. Everything you need is in the ReadMe file. - Proceed to slice and print the tower
- Please remember to DELETE the post-script when done testing. If you forget to delete the post script, it will induce your printer to keep changing temperature as it prints the next model!