Spider and -Web
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quickly modelled this spiderweb and spieder to create hallowenn decoration for doorframes and other corners.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 275
- Wydruki
- 4
- Wyświetlenia
- 1053
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Attribution — Share Alike
Spider and Spiderweb designed in Fusion 360.
You can set the nozzle diameter to 0.5mm for a single wall line on the Spiderweb (even with a 0.4mm nozzle). I even tested 2 extrusion lines per Spiderweb-line (set nozzle to 0.4mm and horizontal expansion to +0.1mm) - so the Spiderweb is a little stronger.
The 5 Tabs on the Spiderweb can be fixed to the wall with double sided tape or normal tape (like I did it - see the picture).
The Spider has a gap where the lose end of the Spiderweb can be sticked in - if you print it using TPU you can stretch the spider to attach it to the Spiderweb very easy - no glue required.
If printed in PLA you can modify the angle of the lose end by warming it a litte with a lighter and glue the spider to the web.