Spider and -Web
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quickly modelled this spiderweb and spieder to create hallowenn decoration for doorframes and other corners.
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 275
- Makes
- 4
- Views
- 1,053
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Share Alike
Spider and Spiderweb designed in Fusion 360.
You can set the nozzle diameter to 0.5mm for a single wall line on the Spiderweb (even with a 0.4mm nozzle). I even tested 2 extrusion lines per Spiderweb-line (set nozzle to 0.4mm and horizontal expansion to +0.1mm) - so the Spiderweb is a little stronger.
The 5 Tabs on the Spiderweb can be fixed to the wall with double sided tape or normal tape (like I did it - see the picture).
The Spider has a gap where the lose end of the Spiderweb can be sticked in - if you print it using TPU you can stretch the spider to attach it to the Spiderweb very easy - no glue required.
If printed in PLA you can modify the angle of the lose end by warming it a litte with a lighter and glue the spider to the web.