1 / 4
qidi-X-Plus hood cover with closable hose connector — zdjęcie 1
1 / 4

qidi-X-Plus hood cover with closable hose connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A hood cover with closable 50mm hose connector. It is a remix of Elmagnifico666's "Qidi XMAX snap-on filament guide".

Ocena
0 / 5
Polubienia
6
Pobrania
42
Wydruki
0
Wyświetlenia
447
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a hood cover for the qidi-X-Plus with closeable 50mm hose connector and screw mounting. 

For mounting it is necessary to melt 3 threaded inserts M3x5,7 (number A and B). The two inserts under number A will still protrude approx. 2mm after melting. This normal.

Fixing it with two M3x6 screws and two large washers.

The hose connection is intended for heating a dry box during printing. When the function is not used, the opening can be closed with the lid.

Printing:
Place it as it is saved.
0.2 mm layer height
Support: No
 

This is a remix of Elmagnifico666's nice "Qidi XMAX snap-on filament guide". https://www.thingiverse.com/elmagnifico666/designs

 

Tagi