qidi-X-Plus hood cover with closable hose connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A hood cover with closable 50mm hose connector. It is a remix of Elmagnifico666's "Qidi XMAX snap-on filament guide".
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a hood cover for the qidi-X-Plus with closeable 50mm hose connector and screw mounting.

For mounting it is necessary to melt 3 threaded inserts M3x5,7 (number A and B). The two inserts under number A will still protrude approx. 2mm after melting. This normal.
Fixing it with two M3x6 screws and two large washers.
The hose connection is intended for heating a dry box during printing. When the function is not used, the opening can be closed with the lid.
Printing:
Place it as it is saved.
0.2 mm layer height
Support: No
This is a remix of Elmagnifico666's nice "Qidi XMAX snap-on filament guide". https://www.thingiverse.com/elmagnifico666/designs