Keycaps for mechanical 66% keyboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is a keycap set compatible with mx style switches.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 293
- Wydruki
- 1
- Wyświetlenia
- 4456
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
It is a keycap set compatible with mx style switches.
The files that start with keycap[...].stl are the blank switches that serve as a base for all the other. I included them in case someone wants to have some some custom keys.
The keyboard in the picture is Clueboard/FC660m, and can also be 3d printed: https://www.thingiverse.com/thing:3010436
Print instructions
I would recommend a small nozzle, 0.2 or 0.3 mm.
The keycaps from the picture are printed with a 0.4 nozzle and it was challenging.
Since the keycaps are floating island style and have no vertical details, there is no need for high resolution, 0.2 should be fine.
The symbols are 0.8mm deep, add a layer change at that point.
Please experiment with a single keycap until they fit perfectly on a switch, imperfections or too much stringing inside the stem will make them unusable.