1 / 4
Giantmouse Fixed 1 (GMF1) handle scales — zdjęcie 1
1 / 4

Giantmouse Fixed 1 (GMF1) handle scales

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Handle scales for the GMF1 that incease the thickness to 8mm for better grip.

Ocena
0 / 5
Polubienia
3
Pobrania
76
Wydruki
0
Wyświetlenia
1102
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Those are thin knife scales that double the thickness at the grip to improve grip, especially when using a heavily textured bed for printing. There is a sacrificial layer at the holes modelled in so no supports are necessary  but the layer needs to be removed after printing. The three screws are not only aesthetic but also insure that the scales are flat on the steel.

Hardware:

  • 3x M3x6mm button head screws
  • 3x M3 hex nuts

I recommend PETG for better temperature resistance than PLA and better chemical resistance then ABS/ASA. Print grip side down on a textured sheet.

Tagi