1 / 4
Giantmouse Fixed 1 (GMF1) handle scales — image 1
1 / 4

Giantmouse Fixed 1 (GMF1) handle scales

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Handle scales for the GMF1 that incease the thickness to 8mm for better grip.

Rating
0 / 5
Likes
3
Downloads
76
Makes
0
Views
1,102
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

Those are thin knife scales that double the thickness at the grip to improve grip, especially when using a heavily textured bed for printing. There is a sacrificial layer at the holes modelled in so no supports are necessary  but the layer needs to be removed after printing. The three screws are not only aesthetic but also insure that the scales are flat on the steel.

Hardware:

  • 3x M3x6mm button head screws
  • 3x M3 hex nuts

I recommend PETG for better temperature resistance than PLA and better chemical resistance then ABS/ASA. Print grip side down on a textured sheet.

Tags