22 AWG Silicone Hook Up Wire Dispenser ( 6 Spools )
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dispenser for silicone hook up wire with clips. Will hold up to 6 Spools 55mm Diameter x 21mm deep.
- Ocena
- 4 / 5
- Polubienia
- 21
- Pobrania
- 153
- Wydruki
- 3
- Wyświetlenia
- 1070
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Dispenser for silicone hook up wire, similar
https://www.amazon.co.uk/gp/product/B08R9WLLSZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
the spools in this set are 55mm diameter x 21mm deep,
Holds up to 6 spools. Each spool has a clip on the outside of the base to hold the wire and prevent tangling. The Lid is optional, the dispenser will work perfectly without it. The shaft is optional, if you want to stop the spools rubbing on the bottom of the dispenser use the shaft.
There are holes in the base and lid for 4x3 magnets, the lid is a good fit and stays on without the magnets. The magnets add a bit of security if your printer is not quite dimensionally accurate and the lid is loose.
All models are in the correct orientation for printing. The base should have supports touching build plate only.