VeriGrind Raptor Stops
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In the process of printing the "VeryGrind" Sharpening system and wasn't sure of the length the tool needs to extend.…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
In the process of printing the "VeryGrind" Sharpening system and wasn't sure of the length the tool needs to extend. Found the Raptor system which recommends a 1.75, 2, and 2.25 in distance. This is a very simple piece to accomplish that.
Print on the side at 50% infill and .2 layers for strength.
if anyone has a Raptor system for setting the angle, I'd be happy to model the pieces from some tracings or good photos with scale.
"VeryGrind" - by marmotjr https://www.thingiverse.com/thing:1855586?fbclid=IwAR046xD8QxBLn5hpIQg-seR_xv0Z81Q99oewjgdg8m_DdhxqHgLXK4WMGN4
Print Settings
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
50%
Category: 3D Printing