VeriGrind Raptor Stops
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
In the process of printing the "VeryGrind" Sharpening system and wasn't sure of the length the tool needs to extend.…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 55
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
In the process of printing the "VeryGrind" Sharpening system and wasn't sure of the length the tool needs to extend. Found the Raptor system which recommends a 1.75, 2, and 2.25 in distance. This is a very simple piece to accomplish that.
Print on the side at 50% infill and .2 layers for strength.
if anyone has a Raptor system for setting the angle, I'd be happy to model the pieces from some tracings or good photos with scale.
"VeryGrind" - by marmotjr https://www.thingiverse.com/thing:1855586?fbclid=IwAR046xD8QxBLn5hpIQg-seR_xv0Z81Q99oewjgdg8m_DdhxqHgLXK4WMGN4
Print Settings
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
50%
Category: 3D Printing