Costume Axe for Closet Rod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick fun axe head model to attach to standard 1-5/16" (33mm) wooden closet rod for the handle
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- GNU General Public License v2.0
Need a quick axe for a costume? This axe head comes in two parts that fit around a standard wooden closet rod (1-5/16" or 33 mm diameter) which can be found at any home improvement store or maybe already in your closet!
Prints most easily in two halves with the flat sides on the print bed, with a small amount of support which is easily removed. Glue both sides together (I used superglue) and slide over the handle rod, or for a more permanent installation glue them together on the rod in the first place.
I have only provided a model for one half, just use the mirror feature in Prusaslicer or Cura to print the other half.
The default size of the hole is a very tight fit onto the closet rod, if you want a more free-sliding fit you can scale these up by 0.5%. If you want to re-use the closet rod afterwards, I suggest scaling up the model slightly.