Costume Axe for Closet Rod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick fun axe head model to attach to standard 1-5/16" (33mm) wooden closet rod for the handle
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 56
- Makes
- 0
- Views
- 392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- GNU General Public License v2.0
Need a quick axe for a costume? This axe head comes in two parts that fit around a standard wooden closet rod (1-5/16" or 33 mm diameter) which can be found at any home improvement store or maybe already in your closet!
Prints most easily in two halves with the flat sides on the print bed, with a small amount of support which is easily removed. Glue both sides together (I used superglue) and slide over the handle rod, or for a more permanent installation glue them together on the rod in the first place.
I have only provided a model for one half, just use the mirror feature in Prusaslicer or Cura to print the other half.
The default size of the hole is a very tight fit onto the closet rod, if you want a more free-sliding fit you can scale these up by 0.5%. If you want to re-use the closet rod afterwards, I suggest scaling up the model slightly.