1 / 2
Cascade card wallet with magnetic cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added a magnetic cover to secure the cards from falling off.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 3996
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (27)Powiązane
I loved the original model very much but then over time the cards were loosing their grip (I printed in PLA).
So made a cover and few holes to glue in some 3X2 mm magnets (12 count). Use little glue with spray on hardener for a firm bond.
The cover slides on and latches magnetically for satisfying and secure hold.
Magnet can be obtained from amazon and here is the link to what I used
NOTE:
- Please pay attention while gluing the magnets ensuring the magnetic polarity. once glued they wont come off.
- Also note that magnet can interfere with the magnetic strip on the card but I have seen enough videos around this and have used mine for a few weeks now without any issue. Also most cards are these days chip bases so it should not be a problem.
Thanks to Hugo for the wonderful and inspiring original design.