1 / 2
Cascade card wallet with magnetic cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added a magnetic cover to secure the cards from falling off.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 97
- Makes
- 1
- Views
- 3,994
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
I loved the original model very much but then over time the cards were loosing their grip (I printed in PLA).
So made a cover and few holes to glue in some 3X2 mm magnets (12 count). Use little glue with spray on hardener for a firm bond.
The cover slides on and latches magnetically for satisfying and secure hold.
Magnet can be obtained from amazon and here is the link to what I used
NOTE:
- Please pay attention while gluing the magnets ensuring the magnetic polarity. once glued they wont come off.
- Also note that magnet can interfere with the magnetic strip on the card but I have seen enough videos around this and have used mine for a few weeks now without any issue. Also most cards are these days chip bases so it should not be a problem.
Thanks to Hugo for the wonderful and inspiring original design.