1 / 5
Extruder motor cooler using print/layer/front fan MK3S
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
- E motor cooler using your unused layer fan
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 657
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
From the original design, I just added two screw holders for the print fan to mount on top (not pretty but it works). I removed the FS cover (from the original design) to quickly mount and dismount it. So when I need to print strong ABS parts in a heated enclosure (I don't need the part cooling fan on those cases), I just unscrew the print fan, add this fan holder and screw the print fan on it.
INSTRUCTIONS:
- Print it with default profiles, no supports on ASA/ABS/PC.
- Remove the textil sleeve, and extend the layer fan cable about 4 cm.
- Add two square nuts (from the spare bag)
- I recommend to add some silicone to the nuts and to the cable holder.
- Activate “KEEP FAN ALWAYS ON” and set fan speed you want.
- To reduce the E motor temperature even more, I recommend to add the following code at the START G-CODE (it will reduce the E motor current): M907 E410
- See pictures
UPDATE:
- I improved the attachment to the engine.