Rotating Rings Toy Cabinet/Drawer Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original Rotating Rings Toy by Marvin adapted to use as Cabinet/Drawer Knob
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 724
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
The popular Rotating Rings Toy now as a cabinet knob
I liked the design of Marvin's rotating ring toys. So why not use it as Cabinet/Drawer knob?
Added a support rod with a hole of Ø3,7mm, 10mm deep so that a bolt of M4 or a screw Ø4 can be directly screwed in. (if necessary or desired with the use of a bolt, you can tap it yourself with a tap M4).
I left the model at 100% to make sure the rings rotate freely.
I have added a 2nd model in which the outer ring is omitted (number of moving rings is then 3 instead of 4). As a result, the knob comes out at Ø50, which I personally find a nice size, without sacrificing too much on the function and/or the design. A separate ring has been added as an STL file so you can use it as a negative volume to remove the outer ring. See also the available project.
Feel free to scale. You can use below table as reference.
| Scale | Knob | Hole | Bolt | Remark: |
| 75% | Ø37.5/Ø45 | Ø2,8 | M3 | If necessary, use smaller layer height. (perimeters may be reduced to 3) |
| 100% | Ø50 /Ø60 | Ø3,7 | M4 | As printed (set perimeters to 4) |
| 125% | Ø62.5/Ø75 | Ø4,6 | M5 | (set perimeters to 4) |
| 150% | Ø75/Ø90 | Ø5,6 | M6 | Advisable to use a tap! (set perimeters to 5) |
For an impression of possible color and use of materials, see the makes of the original model!