Rotating Rings Toy Cabinet/Drawer Knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original Rotating Rings Toy by Marvin adapted to use as Cabinet/Drawer Knob
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 104
- Makes
- 1
- Views
- 724
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
The popular Rotating Rings Toy now as a cabinet knob
I liked the design of Marvin's rotating ring toys. So why not use it as Cabinet/Drawer knob?
Added a support rod with a hole of Ø3,7mm, 10mm deep so that a bolt of M4 or a screw Ø4 can be directly screwed in. (if necessary or desired with the use of a bolt, you can tap it yourself with a tap M4).
I left the model at 100% to make sure the rings rotate freely.
I have added a 2nd model in which the outer ring is omitted (number of moving rings is then 3 instead of 4). As a result, the knob comes out at Ø50, which I personally find a nice size, without sacrificing too much on the function and/or the design. A separate ring has been added as an STL file so you can use it as a negative volume to remove the outer ring. See also the available project.
Feel free to scale. You can use below table as reference.
| Scale | Knob | Hole | Bolt | Remark: |
| 75% | Ø37.5/Ø45 | Ø2,8 | M3 | If necessary, use smaller layer height. (perimeters may be reduced to 3) |
| 100% | Ø50 /Ø60 | Ø3,7 | M4 | As printed (set perimeters to 4) |
| 125% | Ø62.5/Ø75 | Ø4,6 | M5 | (set perimeters to 4) |
| 150% | Ø75/Ø90 | Ø5,6 | M6 | Advisable to use a tap! (set perimeters to 5) |
For an impression of possible color and use of materials, see the makes of the original model!