Counting matching models…
Warning! Do not use if you have a destructive pet. Design contains small metal parts that could hurt the animal. This is a simple model I made to prevent my dog from escaping the house. Octagonal shape is a bit easier to grip than round,…
Simple doorknob for sliding door that I designed for my girlfriend. 34mm diameter by 20mm depth. Fits a M4 screw or similar Printed with Polymaker Pastel Peanut Matte PLA No supports. 30% infill. Uses about 8g of filament. Print time 24 min
Einfacher Türknauf, der mit eine langen 4 mm Schraube einfach durchgeschaubt wird. Ich habe ihn mit PLA mit 15 % Füllung gedruckt ohne Rand.
The print must be paused so that you can put the mother in place With a layer height of 0.2, I paused at layer 31
Door knob cover for 36mm thick door and 7.8mm thick bar. Uses 3 m3x10mm with 5mm heads wood screws. Print Settings Printer Brand: Creality Printer: Ender-3 S1 **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 20 **Filament:**…
A niche item to be sure. I have a glass door between my dining room/kitchen and my living room that had a nice lever doorknob, however the dog figured out how to open it and would go into the kitchen and get into trouble. My solution was…
Doorknob/butterfly nut for m5 screw Just put a m5 nut inside
I remixed the Prusa Enclosure doorknobs and doorstop to hold 3mm thick magnets without glue. It can fit magnets up to 20mm by 9mm, but they must be 3mm thick for the press fit to work. It has small cut-outs which can be used to poke the…
A simple template that works on my doors. If you think it is the right template that will fit on your door, test it first, then start designing whatever you'd like! Note: If you are to customize the model, use the STEP file as it produces…
Doorknob / Pomello per portoncino blindato Holes interaxia / Interasse fori di fissaggio: 60mm D.ext: 75mm
(Door)Knob with Low poly Squirtle and Cubone. For Cubone I made the part were the hand holds the bone a bit larger/stonger. With the original version this part broke off. On the back there is place for a M4 nut. It's designed to be tight…
I own a couple of BESTA from different dimensions - and well the doorknob do not center well (different door dimensions). So I build a 1mm buffer to be screwed inside one of the BESTA's and it works nicely. Let me know if you need other…
"Printing in progress" Doorknob Hanger, 2mm thick, quick print. Made by me, enjoy!
for 30mm diameter cylindrical doorknobs with option to add a 8mm diapeter sunken bolt into the knob if wanted for some more rigidity. idea was to make it easier for people with weak hands / arm muscles opening cylindrical rotatable…
A large doorknob stop, to prevent damage to walls by inward-opening doors, including exterior doors and solid-wood fire doors. Big enough to cover most doorknob holes, if there's already some damage; also scales down well if you want…
After construction you need to manually put the treat on the inside lever and when your pet in this case a cat, wants a treat it is getting stimulation as well as a treat and they will overtime learn how to open doors with a…
This is a small doorknob/cabinet handle with a centre screw hole. Note: unlike normal handles, which are screwed in from behind, this one screws in from the front. It conveniently fits the screw of the door of the KidKraft Play Kitchen…
This is an improved version of my other doorknob strike plate. I added a 2mm domed surface to the front to give it a bit more durability at the center. This version will likely need to be printed with support as the void for the adhesive…
This model has larger holes for M3 heat inserts and I rounded some of the edges. Note that the hole spacing is 16mm (center-to-center), which is not the same as the original model from Sovol! This was meant for my custom enclosure, I…
Místo kliky mám otočný knoflík o průměru 46.5mm. Výtisk zlepšuje jeho ovladatelnost. Tištěno z PETG. Vrstva 0.15 mm 4 perimetry horní a spodní výplň koncentrická 6 spodních vrstev g-code je pro Prusa MINI Nasazování je vhodné při větším…
Hello, Today I have a Cannabis Keychain or Neck Pendant for you. Suitable for hippie festivals, but perhaps as a fashion accessory or cosplay. The material I used is PLA/PETG Basic No need to use support If you are interested in my work,…
Commission to Extrud und Gut for reproduction of a door handle for a DDR, vintage cabinet. The original part was injection molded in a – now yellowed – cream-colored tone with a black backplate. The customer was refurbishing an oldschool…
Designed myself using fusion 360 as a simple round wall saver to protect against the doorknob indenting the drywall. 4.5 mm thick. 82mm diameter or .1775 inches thick, and 3.285 inches base diameter, I recommend rotating model over to…
This is a doorknob for emergencies. It could be used as key ring. It also has a screwdriver at tip. Print Settings Printer: kuttercraft Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Grilon3 PLA any Category: Household
I have French Doors but when I had to replace them I was given two doors both with cutouts for deadlatches. What's worse, is because the second door had trim on it, I couldn't put a nonfunctional deadlatch in the recess to hold the second…
Use double sided tape. I recommend to print it with +20% infill, otherwise it will sound hollow and cheap Print in 3 parts and just slot it together, usable just as is, but glue is recommended.
Carqon Classic E2 Doorknob – Ersatzknauf Ersatzknauf für den Verriegelungsmechanismus der Carqon Classic E2 Box-Tür. Details & Kompatibilität: Passgenau für: Carqon Classic E2 Cargo Bikes. Montage: Einfach auf den Bolzen aufschieben.
See images for printing instructions Door-O-Clock (Assistive doorknob lever with lock control) An assistive lever system designed to make circular doorknobs easier to grip and operate. The goal is to give you the leverage and grip you…
A doorknob that looks like a stylized phillipshead-screw. Prints without support. The mountinghole is 4mm and can be used for an 4.5mm woodscrew or an M3 brass insert.
Doorknob "La Béquille" is a lever handle that is a rather elongated handle for opening and closing a door. Should be print in tree separed part : Knob, Lever and block This first version must be improved in order to adapt to any type of…
Just a simple way to protect your wall from those dreaded doorknobs. I printed mine in white Overture PETG at 15% infill and it took roughly an hour.
A rather simple doorknob to replace the old ones on my printer enclosure wall cupboard. You will need M4 nut and screw. Just slide the nut into the slot, and you can fit it to the door with the screw.
This is a two piece design. Print the housing in PLA or ABS, and the cushion in soft TPU. I glued mine together using hardware store epoxy, but I suspect superglue or Gorilla Glue would work just fine. I used a piece of double sided tape…
Depending on your cabinet door you just try to find a screw length thats fits best possible. Use a nut inside the knob to be able to screw it to the door. I also added two filmament changes, one for the stem closes to the door and one to…
An simple but tastefull print in place hinged door/drawer knob. Just lay flat on the printbed and print your hart out. The base has an m4 thread to use an m4 bolt for connecting to the door/drawer.
This is a doorknob for emergencies. It could be used as key ring. It also has a screwdriver at tip. Print Settings Printer: kuttercraft Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: Grilon3 PLA any Category: Household
Parametric tentacle doorknob Configurable inset : Bolt height and length Screw diameter Bolt and screw tolerance
I made 2 simple but really handy drill guides. The corner one has the drill center of 50x50 from the sides. The other one has a 128mm center to center, and 50mm from the side. It also has an handy center marking. I used this one to drill…
Here is a likeness of Mr Doorknob from Alice In Wonderland. I printed and painted, but I think he would look great printed in silk gold PLA too. I made two variations - the first and one I printed is designed to be screwed to the door…
Wanted a hook for the kids to be able to hang up their robes. Over-the-door hooks are too high for them so this gives them something they can reach on their closet doors.
Warning! Do not use if you have a destructive pet. Design contains small metal parts that could hurt the animal. This is a simple model I made to prevent my dog from escaping the house. Octagonal shape is a bit easier to grip than round,…
Color change at 2mm. If you want to be really fancy, another color change at 4.2mm (final layer) to highlight the cat.
Remixed the model to add a small backplate with a 3mm hole to work as a doorknob. Printed as 3 parts so the filament has another color.
This doorknob bumper cover is designed to fit kwikset tylo knobs with or without locks, though likely can be adapted to other styles by scaling the model. Print with 2 walls and 10% gyroid infill, 0.2mm layer height. I used 95A TPU,…
A rather simple doorknob to replace the old ones on my printer enclosure wall cupboard. You will need M4 nut and screw. Just slide the nut into the slot, and you can fit it to the door with the screw. See…
A simple snap-on latch for my printer enclosrue wall cupboard doors. (See the fitting doorknobs here: https://www.thingiverse.com/thing:3586949 ). Slides over the base of one doorknob and clicks firmly over the other one, given that the…
For use with a cardboard box or thin wooden doors ect. Comes with two different lengths. Simply thread them together and voila!
This remix simply adds some creature comforts to the Arogen67 model. I have added a coupler, a nose tip plug that will accommodate a ¼-in eye bolt, and I have also integrated the plug into the nose cone (3 models total). Important Note:…
Update: 5/11/2024: I have upgraded the nosecone for this kit, found here . If you have a printer, that is capable of printing up to 290mm, then you may wish to give that one a try. There is nothing wrong with the nosecone within the kit.…
Background : My office door has a rather old Kwickset doorknob which recently broke. I immediately opened it up and found the plastic core had cracked so I ran to fusion 360 and managed to recreate the original core. I beefed up the walls…
Nozzle: 206 Infill: 80% Build Plate: 64 Build Plate setting: Skirt or Raft
A simple doorknob strike plate with a 1mm recess on the back for adhesive foam mounting tape.
As the lock of my workbench door was defect, i replaced it with a door knob. The metal spring, which held the lock initially, was reused.
Small update: I was really inspired by this model and contest to expand upon my door hanging experience for next go around, and developed a helper model to accompany this one, found here, enjoy:…
I recreated the original doorknobs from the LACK enclosure, but I included set screws to secure them in place, and I included magnet slots for 10x3 disc magnets instead of the bar magnets from the original. I also included a hole…
After screwing the body, one need to glue the emblem. Have a nice day fellas.
Just a doorknop for M4 screw. I added the source for editing so you adapt another screw diameter. Making it bigger and smaller, use scale tool. .10 mm 2 hours print, 0.20mm 1 hour print. Depends on how much time you have and how smooth…
I print from the axis upwards with support, which gives a smooth surface. Also nice with two Colors ;-) But I should use manual Filament-change next time.
Are you tired of measuring doors with a tape measure? Don't want to buy an expensive door-hanger's gauge tool? Then I have just the thing. Remixed from rb's left-handed ruler, this tool is designed to quickly and accurately check door…
I 3d printed this with 0,8 nozzle at 0,64 of layer height He usado una boquilla 0,8 para imprimir más rapido con altura de capa de 0,64 puedes usar practicamente cualquier boquilla y altura de capa
EN This modern doorknob will fit to any furniture. Two versions: I uploaded two models: Model “knob_threaded_inserts.stl” If you have threaded inserts print the file "knob_threaded_inserts.stl". In order to use M4 screws you will first…
Got new lock and keys. For daily use I wanted to have a semi fixed doorknob to open and close the doors from the inside without looking for the keys everytime. But I wanted them also to be removable for holidays and other occasions. So I…
Unlike other printable doorknob levers, these must be sized to fit to the knob and glued in place permanently. The method of attachment does not leave the printed part under constant mechanical stress; consequently, it's less susceptible…
DoorKnob Drill Guide with alignment lines for 2-3/4 '' or 70MM
I wanted a doorknob for my pax closets and decide to quickly create them self. I've added one with a M3 & M4 size for the screw. I also added spacers: Measure the gap between the doors. Select the spacers closest to it. Jam it between the…
The 3-in Doorknob Nosecone Ebay Upgrade! Introduction: This model is an upgrade to the Estes 3-in Doorknob and to my 3-in Doorknob Builders Kit . It includes the ring that will fit inside the shoulder of the nosecone, the ebay sled, and…
Door knob/handle with an M6 thread and an M6 screw. Türknopf/Griff mit einem M6 Gewinde und einer M6 Schraube.
Simple doorknob for sliding door that I designed for my girlfriend. 34mm diameter by 20mm depth. Fits a M4 screw or similar Printed with Polymaker Pastel Peanut Matte PLA No supports. 30% infill. Uses about 8g of filament. Print time 24 min
Cool print in place doorknob sign. Do not enter sign for bedroom or bathroom.
I have 2 doors that open towards themselves that do not hit the wall in the same spot. Space is a bit tight to use those half ball rubber bumpers and I didn't want to have to buy 2 flat wall bumpers. I made this to accommodate the 2 door…
