1 / 3
Shelf Stand for Monitor Speakers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two Legs + a 16mm wood board = Nice Stand
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 1087
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (53)Powiązane
Good looking legs to raise your stuff. Two Legs and a 16mm piece of wood (some shelf boards will do the job) result in a nice shelf stand. Use it for your speakers or use a larger board and put your monitors on it.
Prints well in PLA with dens infill or stronger ones in PETG.
The wood is screwed down with 3 small screws on each side, u will need a wrench or a really small screwdriver.
At the bottom are some deepenings where you can put anti slide stuff.