Bumper Case for External HDD - LaCie Porsche Design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective bumper case for LaCie Porsche Design external hard drives.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 598
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created a TPU protective bumper case for the LaCie Porsche Design External Hard Drive USB 3.0 version, sizes 1-2 TB.
Hard Drive Model No: P9220 (or the similar later versions, LAC302000, STFD1000400, etc)
Hard Drive Dimension: 77mm x 130mm x 18 mm
Note, this will not work with the 500GB, Model No. P9230, or the newer USB-C versions as they're different dimensions.
This print is designed to be made with TPU for added protection. TPU is also required so it can be stretched to fit the hard drive inside. Because of this, it will not work with PLA, ABS, PETG etc.
Recommended TPU settings:
Nozzle Temp: 220°C
Bed Temp: 60°C
First layer speed: 10mm/s
Max print speed: 30mm/s
Supports: Yes, Z distance 0.2mm (detachable)
Other settings: Avoid crossing perimeters (reduces long stringing)
Print will require a bit of post-processing due to TPU and supports being a bit difficult to remove. I'd recommend making support distance a bit further to aid post-processing clean