Holders for splatter screen (Ø33cm/13")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holders for splatter screen (IKEA STABIL) with a diameter of 33cm / 13".
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Holders for splatter screen (IKEA STABIL). Was able to get the screen out of the way when utilizing the empty space under the shelf.
You need to print two sideholders to keep the screen under the shelf.
I created the stopper later as sometimes I pushed the splatter too long and it fell over, so you might not need it if the cupboard is not so long that it can drop from holders.
I then used some doublesided tape I had around and cut pieces that fit well to the printed parts. Doublesided tape should be placed where arrows points in the second picture.
I printed with white ASA.
| Layer height | 0.20mm |
| Infill | 15% |
| Supports | None |