1 / 2
Twin bottle cap - with cutouts for o-rings.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cap that can connect two typical soda bottles and has cutouts for two 22x2 mm o-rings to make the adapter watertight.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 402
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Tried original version, which worked great but was not really suitable for liquids. This is my humble attempt to fix that.
Initial dimensions based on jebissey's twin bottle cap design (https://www.thingiverse.com/thing:5482037). After that I re-did the cap pretty much from scratch (e.g. more pronounced threads).
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Could help with overhangs.
Notes:
Tested with 22x2 o-ring.
Layer height: 0.2mm for nice threads.
