ESP 8266 mounting plate for relais and two small sensors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a small baseplate for using an ESP8266 together with two single screw sensors such as for Weatherstations,…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a small baseplate for using an ESP8266 together with two single screw
sensors such as for Weatherstations, measuring current / voltage and so on plus a relais.
The inner diameter of the screwholes is 2.1 mm. Any wood screw around 2.5 mm in
diameter with a length up to 12 or 15 mm should work fine.
I printed the complete base plate with 100% infill which might be a bit overkill but worked fine.
OpenSCAD file is included. So feel free to add mounting posts as needed.
Edit: I've added an updated V2 version where the screw on sockets have a bit wider base to avoid that it will shear of when you screw in the wood screws.
Category: Electronics