ESP 8266 mounting plate for relais and two small sensors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small baseplate for using an ESP8266 together with two single screw sensors such as for Weatherstations,…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a small baseplate for using an ESP8266 together with two single screw
sensors such as for Weatherstations, measuring current / voltage and so on plus a relais.
The inner diameter of the screwholes is 2.1 mm. Any wood screw around 2.5 mm in
diameter with a length up to 12 or 15 mm should work fine.
I printed the complete base plate with 100% infill which might be a bit overkill but worked fine.
OpenSCAD file is included. So feel free to add mounting posts as needed.
Edit: I've added an updated V2 version where the screw on sockets have a bit wider base to avoid that it will shear of when you screw in the wood screws.
Category: Electronics