Dial Indicator Clamp for Wanhao Duplicator I3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Dial Indicator mount for a Wanhao Duplicator I3 that attaches to the factory fan location. It is a quick…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a Dial Indicator mount for a Wanhao Duplicator I3 that attaches to the factory fan location. It is a quick release design for people who run rear mounted coolers or fanless setups. It is designed for DI's with 9.5mm shafts and uses a small binder clip to lock the indicator into position. Fusion 360 archive is included if you wish to remix it.
Print Settings
Printer:
Wanhao I3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
25%
Post-Printing
You'll need M3 locknuts and adequately long bolts to mount it. I used 10mm, but you could get by with slightly shorter ones. You'll need a small binder clip as well to clamp the DI in place.
Category: 3D Printer Accessories