Vase with patterns and shapes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NOTE: Due to overhang angles, you should not try to print this vase in vase mode.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 297
- Wydruki
- 3
- Wyświetlenia
- 1116
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: Due to overhang angles, you should not try to print this vase in vase mode.
This was my first attempt at making a vase in fusion360. Inspired by geometric patterns and shapes. I think it turned out quite beautiful in the end. Hope you like it!
Print instructions
Important for proper printing:
For the best results you should use .15mm layer height.
You must also:
Set top solid layers to 0
Set infill to 0%
Set number of perimeters to a minimum of 4
If you don't wanna do this yourself, just download the 3MF file, and change the filament and bed temperature to your desired values. In the 3MF file i have used standard 0.15mm quality + prusament PLA profiles on a MK3S.