Vase with patterns and shapes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
NOTE: Due to overhang angles, you should not try to print this vase in vase mode.
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 297
- Makes
- 3
- Views
- 1,116
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: Due to overhang angles, you should not try to print this vase in vase mode.
This was my first attempt at making a vase in fusion360. Inspired by geometric patterns and shapes. I think it turned out quite beautiful in the end. Hope you like it!
Print instructions
Important for proper printing:
For the best results you should use .15mm layer height.
You must also:
Set top solid layers to 0
Set infill to 0%
Set number of perimeters to a minimum of 4
If you don't wanna do this yourself, just download the 3MF file, and change the filament and bed temperature to your desired values. In the 3MF file i have used standard 0.15mm quality + prusament PLA profiles on a MK3S.