1 / 1
BenQ XR3501 Monitor Mount — zdjęcie 1

BenQ XR3501 Monitor Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

PETG-printed mount designed for the BenQ XR3501 to fit directly onto some steel VESA frame keeping the rear cover

Ocena
0 / 5
Polubienia
0
Pobrania
37
Wydruki
0
Wyświetlenia
331
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

Upgrade your BenQ XR3501 setup with this custom-designed monitor mount, for stability and a clean fit.
Unlike many mounts found online, this design allows you to keep the monitor’s rear protective cover installed while providing a solid connection to your steel frame.


Hardware Required:
2 × 6 mm wide hex-head screws (length depends on frame thickness) – for attaching mount to frame.
6 × 4 mm wide × 20 mm deep screws – for securing mount to monitor.

Installation Tip:
Before installing, remove the small black plastic piece located at the top of the original mounting slot.

Print Settings:

  • Supports: On build plate only
     
  • Layer height: 0.25 mm
     
  • Perimeters: 5 (minimum)
     
  • Infill: 30% grid 
     
  • Filament: PETG

Tagi