Liczymy pasujące modele…
Tubenquetscher: Wenn er fertig gedruckt ist, eventuell mit einem Schmirgelpapier die Öffnung ein wenig zurecht schleifen, dass die Tube optimal hineinpasst, da nicht alle Tuben gleich sind. Datei = G-Code und .stl
Reinforced in blender and then edges hand smoothed/filleted with dynamic topo sculpting
This is a small holder to fix webcam (or any other device with standard 1/4" tripod screw) atop of a BenQ ScreenBar. The webcam orientation is adjustable. No fastener needed.
Probieren Sie die effiziente Art und Weise, Ihre Zahnpasta mit unserer Zahnpastapresse zu dosieren. Mit zwei Komponenten war es noch nie so einfach, Ihre gesamte Zahnpasta zu erhalten. Diese einfach zu bedienende und langlebige Squeezer…
This mount adds a 5mm base to ensure that you can mount the screenbar without covering the displays camera/sensors. Updated to v2 with cuts for microphone arrays!
Der 3D-gedruckte Tubenquetscher ist ein praktisches Werkzeug, das speziell dafür entwickelt wurde, Tuben wie Zahnpasta, Salben, Cremes oder Farben effizient und einfach zu entleeren. Durch sein cleveres Design ist er robust und langlebig…
This is a small “quick and dirty” mount I designed for the Halo Screenbar that allows for mounting of I'd say most normal Webcams, in my case a Logitech Brio. There is an original part available for purchase from BenQ, but it doesnt quite…
Zum ausquetschen der Tuben für z.B. Zahnpaste oder Creme.
Die wirklich gute BenQ Screenbar Halo passt nicht richtig auf meinen Philips Curved Monitor 345b. Die Monitorhalterung rutscht nach einiger Zeit in den Anzeigebereich, was ich als sehr störend empfinde. Der mitgelieferte Original-Adapter…
This is a remix of hjzl16's design of a webcam holder for the BenQ screenbar. I adjusted the dimensions of the clip to fit the newer BenQ screenbar Halo. Ball clamp and ball head screw can be used from the original. Printed it with PLA…
This allows the use of the Benq Screenbar's included mount on a 42" LG C2. User reviews suggest this should fit the C3 and C4 as well, but I have not tested on them personally. The C2's housing does not allow for proper mounting of the…
Just a simple holder you can attach to your Screenbar pro to place a webcam. I've just vecro'd it to the Screenbar, but you could tape it, or use magnets too. Similar to this but much more DIY:…
Material: 13g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 20 % / No Support Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be…
I'm a big fan of the Benq Monitor lights as they offer a simple genius light for your desk. Unfortunately I couldn't use it stock on either of my workspaces without modifications. You can now benefit from my struggles ;D This adapter…
I have a specifically thick 34" ultrawide monitor, that needed the use of the Curved Monitor Adapter included with Benq's ScreenBar Halo. Unfortunately, due to the thickness of my screen (a Fox Spirit, not many sold lmao) it was…
Cap for benq projector lenses, designed for the mx660 model. It fits perfectly. On the outside it has the logo of benq and on the inside that of ho-kago tea time (musical group from the anime k-on). This projector did not have the cover…
Support pour télécommande de projecteur Benq W1070
It is a simpler Version of the Universal Ceiling Mount -5J.JAM10.001, except for the use of a ball joint for aiming. For installation you need a 30mm M4 screw, which go into the projector. To join the claws with the connection plate I…
The shape and thickness of my new monitor does not really allow positioning the BenQ Screenbar on top of it. Furthermore the slightly curved display isn't an ideal mix with the non-curved LED bar. So I've created this adapter plate to…
A continuity camera holder for iPhone 12/13/14 pro (may work on others, I have not tested) with MagSafe insert specifically designed to sit on top of the Benq PD3200U. It may work on other Benq Monitors assuming they have the same side…
This is a BenQ Screenbar Mount for the Alienware AW3423DWF But it probably also fits other monitors. It uses 4 M4x12 screws but could also be modified to simply be glued together. I used old screws in the weight box but you can use…
Since my ceiling mounted Benq W4000i projector (named HT4550i in the US market) shows a disturbing bright light bleed / glow on the ceiling, I designed this visor to block the stray light. Works pretty well for me and should be working…
This is a stand extension for BenQ GW2280 monitor. My table is low and I wanted the top of the screens just below eye level. IMPORTANT: Exclude supports from the middle of the pocket. Support placement is shown in an image above ^. I…
I'm a big fan of the Benq Monitor lights as they offer a simple genius light for your desk. Unfortunately I couldn't use it stock on either of my workspaces without modifications. You can now benefit from my struggles ;D This adapter…
For users who got the BenQ EW3280U monitor, and, a Chinese Wisecoco 14 Inch 3840x1100 4K monitor, this Fixer is the must-have, definitely. This monitor leg with VESA mount can mount the Chinese Wisecoco 14 Inch 3840x1100 4K monitor (only…
PLA Füllung 50% Schichthöhe 0,28mm mit Stützen (Schluessel), ohne Rand
Custom made screenbar halo mount. Added felt tape for added scratch protection as well. Print on its side for strength.
Got a Mac Mini M4 and a BenQ 27 inch 5k monitor (PD2730S)? Then this is the mount for you :) Attaches the Mac Mini M4 to the back of the monitor to hide the Mac and its cables away, for a clean desktop experience. Printing instructions:…
////////////////////////////////////////////////// SD-, MicroSD-/USB-holder for ::: Benq #Zowie #XL2546 #Monitor #Ledge https://www.printables.com/model/215189-monitor-ledge-benq-zowie-xl-2546-modular…
This mount plate can be used to attach your BenQ HT2150ST projector to the ceiling. To use it, you will need to also print the ceiling plate, swivel, and universal joint from hyperair's projector ceiling mount . See that project for more…
This remix of the BenQ Halo ScreenBar Remote wall mount holder was remodeled in Onshape to work with the IKEA Skådis pegboard system using T-clips . It holds the remote base securely while still allowing the dial to be used, snugly enough…
////////////////////////////////////////////////// Benq #Zowie #XL2546 #Monitor #Ledge Addon:: SD-Card / USB-Stick Holder for [[Benq #Zowie #XL2546 #Monitor #Ledge]]…
The stand is made to fit in the tray of a BenQ XL2411T monitor, But works just fine on its own. Designed to be able to place and remove the controllers without any force. The pictured version is printed with 0.2mm Layer Height. Check out…
Stray light deflector for the BenQ W5700 rojector
The monitor I use for my test area is a BenQ RL2455 (as far as I can tell lol). Half the time my projects do not require a monitor, and as such I used to set it on the floor to free up desk space, but this isn't Ideal as sometimes I…
BenQ GV30 Bed Mount | Accommodates 20mm thick bed frame
Tubenquetscher zum komfortablen ausquetschen von Tuben (z.B. Zahnpaste oder Nahrungsmittel…) => Achtung, für Verletzungen kann keine Gewähr übernommen werden, nicht kommerzielles Bastlerprojekt. ≤= Das Design ist recht klobig, damit Tuben…
Remix to fit BenQ Screenbar Pro better. Not blocking the front and back microphones, camera, and light sensors. Fit the shape of Screenbar Pro rubber base, adjust the back plate, provide better grip I also have another remix for Pro…
Tubenquetscher zum komfortablen ausquetschen von Tuben (z.B. Zahnpaste oder Nahrungsmittel…) z.B. durch Senioren... => Achtung, für Verletzungen kann keine Gewähr übernommen werden, nicht kommerzielles Bastlerprojekt. ≤= Das Design ist…
This is a small and compact mount for the gv50 projector from Benq. It has adjustable tilt and can be mounted with just three 4mm screws. To Assmble the mount you'll need: 3x M8 rods with a length of 245mm 2x M4 heatset inserts 2x M4x16…
Das ist der Tubenquetscher mit den Herzaugen. / This is the Tube Squeezer with heart eyes. Lücke / Gap : 6,3 cm x 0,1 cm
Ratschentubenquetscher mit nur 2 Ratschenfedern, aber größer als das Vorbild und mirt Aufhänger
Wall support for benq projector remote Instructions Print, drill a hole on the wall (5mm) and use a screw to secure it. Category: Organization
Příchytka na uchycení monitoru ke stolu
🇬🇧 English This holder allows the Benq Screenbar to be used on a monitor mount with two screens. The clamping ring with a diameter of 35 mm can be mounted on the bracket shaft of the monitor mount, while the three coupling rods with a…
Replacement battery cover for BenQ projector remotes. Compartment dimensions: Opening: 75mm x 35mm Fits 2x AA batteries Mechanism: Slide-in tabs on one end, cantilever snap catch on the other. Print orientation: Right side up (top face…
Material: 13g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 20 % / No Support Kein zusätzliches Material erforderlich / no additional material required Gutes Gelingen und über ein Like würde ich mich freuen. Good luck and I would be…
PLA Füllung 50% Schichthöhe 0,28mm mit Stützen (Schluessel), ohne Rand
for 20 mm and 19 mm thick monitors for direct mounting. I printed two of them and put them on each end of the screen bar.
This is a remix of Juice's modification. I adjusted the base of the clip bigger to be more steady.
The original holder was way too short for those with a curved screen or 40-inch ultrawide monitor, so I modified it and made it longer and also have it coming out at a lower angle. The edit isn't perfect since I'm not very good at editing…
This mount adds a 5mm base to ensure that you can mount the screenbar without covering the display's ambient light sensor, which is needed to enable automatic screen brightness functionality in MacOS. The webcam in the photo is an…
This is a monitor riser created for Benq monitors with the non hight adjustable T-shaped foot. I have left the .stl file
Servo: https://hitecrcd.com/hs-805bb-mega-giant-scale-servo/?srsltid=AfmBOorRR1376p5IAzGzTO_FaQf2bx7lelvEVoJRratLaL3rY9aDiof2 Stepper NEMA 11 https://www.aliexpress.com/item/1005001842806192.html
Mount for benq screenbar. The OEM claim didn't work with my curved monitor.
This part enables you to fix a Dell Webcam WB7022 and a 6'' monitor (FEELWORLD F6 Plus V2) on top of the BenQ ScreenBar Halo. Main purpose of this setup is to be able to look at the other person in the eyes during remote meetings.
🇬🇧 English This holder allows the Benq Screenbar to be used on a monitor mount with two screens. The clamping ring with a diameter of 35 mm can be mounted on the bracket shaft of the monitor mount, while the three coupling rods with a…
These are replacement arms for the BenQ 3d glasses that take the batteries (not the rechargeable ones). The original glasses seem to have a bad design where the arms break really easy. I included two versions.. one with pins like the…
needs heat inserts! plenty strong with them. get from m2 to m6 assorted box with flush screws also assorted box
The hole in the monitor's foot is perfect for inserting the kit remote control. Holder for secure installation and storage of excess cable. Material: PET-G / PLA Supports: YES The hole in the monitor's foot is perfect for inserting the…
Replacement battery cover for BenQ projector remotes. Compartment dimensions: Opening: 75mm x 35mm Fits 2x AA batteries Mechanism: Slide-in tabs on one end, cantilever snap catch on the other. Print orientation: Right side up (top face…
Wanted to hang my mac Mini behidnd Benq monitor. Since I did not find sutable design, I draw my own. It is not perfect fit regardig the curve, but good enough for me. Holes are VESA 100 aligned. I used two metal inserts with threads.
Simple monitor shelf modelled to fit the angle and front lip on the BenQ RL2755-B (or ZOWIE RL2755) gaming monitor. Split into 4 sections for easy printing and modular setup, there is Left and Right end pieces (with a rear lip as well as…
Just a simple base to tilt a BenQ GL2450 a little bit extra forward. Might work for other similar models. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Category: Computer
Remix to fit BenQ Screenbar Pro better. Not blocking the front and back light sensors. Fit the shape of Screenbar Pro rubber base, adjust the back plate, provide better grip. The reason to rise the screenbar so high is to have the back…
This mounting bracket was designed to make using the projector easier in temporary setups. The ubiquity of ¼"-20 screw support solutions in the photo/video industry makes it simple to find a quick place to mount a projector. Gorilla pods,…
Benq - Monitor - XL2546 - USB-HUB Mount ////////////////////////////////////////////////////////////////////////// Its for:: RSHTECH USB Hub Active 3.0 with 36W (12V / 3A) power supply, aluminum 10 ports USB 3.0 hub for charging and data…
One version with Swedish and one with English text included. Originally published on YouMagine back in 2016
Upgrade your BenQ XR3501 setup with this custom-designed monitor mount, for stability and a clean fit. Unlike many mounts found online, this design allows you to keep the monitor’s rear protective cover installed while providing a solid…
This is a really simple diffuser for the ScreenBar. The lowest setting on the ScreenBar was still a bit too bright for me. You'll need to print two and either glue or melt them together. I personally used a soldering iron to melt them…
Halterung für die Benq Screenbar, falls diese direkt an der Oberseite befestigt werden soll und nicht wie von Benq auf einen Monitor aufgesteckt werden soll. Das Stück mit dem Gegengewicht einfach weglassen. Halterungen einschrauben und…
Hierbei handelt es sich um eine Halterung, um die BenQ Screenbar Halo beispielsweise unter einem Regal zu montieren
I have a Benq Screenbar and I'm very happy with it. But I was unable to put a webcam above it, because the surface isn't flat. So I created this small simple riser. It has a hole to screw the webcam to it.
Under desk Benq Light Bar controller holder with easy access. Affix with double sided mounting tape and add magnets (four 10mmx2mm) if you would like, and you'll free up just a bit more desk space. Easy slide in/slide out access.
I wanted a way to have the remonte control on the wall next to me instead of on my desk ; I designed this wall mount for that. The remote just fits perfectly in holder, and there the space for a screen. It could be easily modified to use…
Compatibility mod for BenQ ScreenBar Halo for thick monitors. Opening case Remove 4 screws. 2 under regulatory label, 2 under corner of foam pad. (Pic1) Use a spudger to separate sides at the curved double stick tape and then remove whole…
![SD-, MicroSD-/USB-holder [FOR] Monitor Ledge - Benq-Zowie XL 2546](https://media.printables.com/media/prints/240927/images/2175804_b88fd8aa-daf1-4246-a3c4-fa11612b5529/2022-07-12-19_39_12-autodesk-fusion-360-personal-.jpg)
