1 / 10
BenQ ScreenBar Halo thick monitor mod — zdjęcie 1
1 / 10

BenQ ScreenBar Halo thick monitor mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modification for the BenQ ScreenBar Halo for thicker monitors.

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
364
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Public Domain

Compatibility mod for BenQ ScreenBar Halo for thick monitors.

Opening case

  1. Remove 4 screws. 2 under regulatory label, 2 under corner of foam pad. (Pic1)
  2. Use a spudger to separate sides at the curved double stick tape and then remove whole cover in one piece (translucent and grey part). (Pic2)
  3. Remove flat flex by flipping up black lever ▲ Remove 4 screws under foam pad. (Pic3)

Modification to case
Drill hole and elongate into a slot in counterweight case offset to connector side. (Pic4)

Camera attached using a ¼'-20x½' pan head screw

Tagi