1 / 7
BenQ Monitor Riser (Stand Extension), GW2280
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a stand extension for BenQ GW2280 monitor. My table is low and I wanted the top of the screens just below eye…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 44
- Wydruki
- 2
- Wyświetlenia
- 517
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a stand extension for BenQ GW2280 monitor.
My table is low and I wanted the top of the screens just below eye level.
IMPORTANT:
- Exclude supports from the middle of the pocket. Support placement is shown in an image above ^.
- I don't recommand printing it in PLA as PLA bends over time, when a constant load is applied.
STEPS:
- Print the file;
- Remove the supports (also cut the horizontal "support"/bridging helper between the two cuts above the pocket).
- Mount on stand & mount the monitor on it.
If you need to edit the source file, this is a F360 public link: https://a360.co/2YZNMh7
If you edit it, post it as a remix :)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.28 mm
Infill:
25
Filament: ERYONE PETG Black
Notes:
Nozzle at 235°C, bed at 70°C.
Category: Household
IMPORTED FROM MY THINGIVERSE.