1 / 9
Monitor Shelf for 27" BenQ RL2755-B (or ZOWIE RL2755) — zdjęcie 1
1 / 9

Monitor Shelf for 27" BenQ RL2755-B (or ZOWIE RL2755)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple monitor shelf modelled to fit the angle and front lip on the BenQ RL2755-B (or ZOWIE RL2755) gaming monitor.

Ocena
0 / 5
Polubienia
0
Pobrania
15
Wydruki
0
Wyświetlenia
106
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution

Simple monitor shelf modelled to fit the angle and front lip on the BenQ RL2755-B (or ZOWIE RL2755) gaming monitor. Split into 4 sections for easy printing and modular setup, there is Left and Right end pieces (with a rear lip as well as edge lip to stop things rolling off) and two identical middle sections with only rear lip. You can print just one section or as many or as few as you like. Neatly fits the monitor's rear andle, so no extra parts, brackets or hardware needed. I printed mine quick and rough draft settings for speed and strength, but I would suggest printing at better settings as an overnight print. They all fit on one bed, as long as you have good adhesion - if not, consider using a brim or raft. 

There is also a test piece of the angle (i brought the angle in one degree more after this test print) it may be worth trimming a section of one of the STL files and printing your own test piece, if you want to check fitment on your monitor before comitting to a full print


Uploading in case useful to anyone else, I did consider making a mesh/hex hole one, or maybe make a lego base for minifigs, but the draft works great so I have not made more. Happy to share the original files for editing, but I might be the only person with this monitor who wants a shelf on top, so have not included those yet - message me if you like!


Printed in Black PLA at Draft 0.32mm layer height. Suggest whatever material you like, at whatever layer height you like the look of. PLA-CF in Black would match the monitor casing the best. 

Tagi