Thicker Screen for Raspberry Pi 3(2) OctoPi Case with Touch Screen (OctoTouch)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a quick OpenSCAD hack of the original top_v2.stl to make it fit my WaveShare LCD (A) screen, which is somehow 1.x…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a quick OpenSCAD hack of the original top_v2.stl to make it fit my WaveShare LCD (A) screen, which is somehow 1.x mm thicker than the one used in the original design.
- top_v2.stl - original top
- top_v2_+2mm.stl - 2mm thicker
- top_v2_+3mm.stl - 3mm thicker
- top_v2_+2mm_noinserts.stl - 2mm thicker with insert holes filled for M3 screws (no inserts necessary)
- top_v2_thicker.scad - the OpenSCAD file used for the hack
BTW, there is a piece inside the excellent https://www.thingiverse.com/thing:3030160 that goes between the screen and the Pi to better support the screen for touching (5_Ender3_Touchscreen_Support.stl). You can find it here directly: https://cdn.thingiverse.com/assets/e3/67/74/20/cf/5_Ender3_Touchscreen_Support.stl
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
eSun PLA+ Black
Category: 3D Printer Accessories