Thicker Screen for Raspberry Pi 3(2) OctoPi Case with Touch Screen (OctoTouch)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a quick OpenSCAD hack of the original top_v2.stl to make it fit my WaveShare LCD (A) screen, which is somehow 1.x…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a quick OpenSCAD hack of the original top_v2.stl to make it fit my WaveShare LCD (A) screen, which is somehow 1.x mm thicker than the one used in the original design.
- top_v2.stl - original top
- top_v2_+2mm.stl - 2mm thicker
- top_v2_+3mm.stl - 3mm thicker
- top_v2_+2mm_noinserts.stl - 2mm thicker with insert holes filled for M3 screws (no inserts necessary)
- top_v2_thicker.scad - the OpenSCAD file used for the hack
BTW, there is a piece inside the excellent https://www.thingiverse.com/thing:3030160 that goes between the screen and the Pi to better support the screen for touching (5_Ender3_Touchscreen_Support.stl). You can find it here directly: https://cdn.thingiverse.com/assets/e3/67/74/20/cf/5_Ender3_Touchscreen_Support.stl
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament:
eSun PLA+ Black
Category: 3D Printer Accessories