Simple Logitech C270 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mount for the Logitech C270. The arm is from Antoniolr_95´s camera mount (link to the left), I just made a…
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 165
- Wydruki
- 5
- Wyświetlenia
- 961
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple mount for the Logitech C270. The arm is from Antoniolr_95´s camera mount (link to the left), I just made a simple holder for it with a pair of screw holes.
I use this in my IKEA stuva printer cabinet but can be mounted anywhere you can get a screw in. The two holes for mounting are measured to fit where you would normally attach your shelves.
Hardware needed:
1 M3 12mm
1 M3 16mm
2 M3 nuts
2 4x20 countersunk wood screws
EDIT 2017-10-19: Designed v2 of the mount arm, with a hole for the nut to make it easier to tighten the arm to the camera.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20%
Category: Camera