Simple LifeCam VX-1000 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mount for the Microsoft LifeCam VX-1000 and TRUST Spotlight Pro, probably fits VX-3000 as well.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 1
- Wyświetlenia
- 233
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple mount for the Microsoft LifeCam VX-1000, probably fits VX-3000 also (not tested and don't know if there is any differences in the mounting).
This mount also works for the TRUST Spotlight Pro webcam according to a comment from Christian.
I used this in my IKEA stuva printer cabinet but can be mounted anywhere you can get a screw in. The two holes for mounting are measured to fit where you would normally attach your shelves.
There are two models, one which mounts the camera on top and one which mounts the camera under.
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20%
Notes:
The bottom one may need to be flipped 90° on the X axis for easier printing, though I printed it as is without problems.
Post-Printing
- Remove the small screw from under the original mount.
- Attach the camera to the printed mount with the same screw.
- Done!
Category: Camera